Browse Forums Building A New House Re: Weep holes are too high. 5Mar 20, 2012 1:00 pm A blog about our renovation http://notmynightmare.blogspot.com.au/ Re: Weep holes are too high. 8Mar 20, 2012 2:47 pm This is from a builder's blurb about it: "The edge beam of the slab is rebated to provide 3 courses of brickwork in lieu of the normally used 2 courses therefore eliminating the exposure of 150mm (6") of concrete around the perimeter of your house" As above this allow's room so if you backfill against the concrete you don't have the weep holes covered/partially coverred. Nothing to worry about and something I actually made sure my builder did it depends on the natural ground level, if they excavated their boundary wall needed to be built as a retaining wall. If you filled, which sounds like the case then you… 1 7084 I know foam has been around since the 90's and CSR started manufacturing Hebel in 1989, so it's definitely possible 5 5447 You are correct. Just read through all the ncc rules and 75mm is the minimum requirement for me. 4 11179 |