Browse Forums Building A New House 1 Aug 27, 2010 10:49 pm Anyone got any information on requirements on the outside of a 90 degree corner? All I have found is the requirements to be 6m form the tangent line if youi are on a T intersection. I have attached a sketch, I have drawn the tangent line where I think it is supposed to be (from looking at T-intersection requirements). The red 'driveway' is approximately 6m from this tangent line. So that makes it in the middle of the front boundary which is not that aesthetically pleasing. The other alternative is to have the drive on the left, but that adds 5m to it and makes it a more dominant feature too. Cracker tells me the board attachment quota has been reached, so if anyone knows what this means...? 1 4833 Hi all I need a guidance on how far I need to space expansion joints in the concrete driveway and its type (keyway/foam.) Contraction joints are at 3m max for a 125 slab. Thanks 0 11058 Building Standards; Getting It Right! Hi All, We have a fall from road to garage front. But we cannot put a drain/grate because no discharge point put by the builder. Now they complain not enough space for… 0 9340 |