Browse Forums Building A New House 1 Jul 31, 2010 8:14 am Hi guys . . . Just wondering what the approximate price is for home rendering looking at doing the front only or whole house. do they quote on size or hourly rate ? what tyes of rendering is available ? Does anyone have any recommendations of companies that do high quality work in sydney ? We are currently building with metricon , and are looking for the smooth render look with approx 2 coats of paint. We feeling the quoted price from the builder was quite high any assistance would be appreciated. thank you all..... Re: Home Rendering Prices and recommendations 2Aug 01, 2010 3:22 pm Cant give advice about render companies in Sydney but we have just had our front done @ less than 50% of builders quote. We got 3 quotes and there was a variance of about $1000 between them, so shop around. They all quoted on size. We chose acrylic render over cement, seems this is most common now. In the end, we paid about $1700 for full render to the front to give an idea of cost. I worked it out at about 40 sq m, including windows and doors (not garage door). Is it possible to render an old corrugated iron shed.I have heard that it can be done if it is covered with chicken wire first.Not sure of the ratio of the render mix and… 0 4896 Dear Members I have to decide the Facade column size. My custom builder standard is 350mm with rendering, but i asked for 470mm plus stone or tiles and yet to get… 0 7497 yep you need a joint, foam is easiest, will look fine once rendered with a joint. 2 5236 |