Browse Forums Building A New House 1 Feb 17, 2010 11:47 am Hi All Thanks to all for the many interesting threads in this forum. My wife and I are planning to build with Formcraft in Perth. We are thinking of using a metal sub frame as the house pad falls approximately 1.5m from the front to the back. I would be interested in hearing from owner builders that have built with Formcraft. I will add the house plans for comment later as the "board attachment quota has been reached". Does this mean the jpeg to too large at 89KB? Re: Formcraft house and plans 2Jul 18, 2010 3:35 pm Hi Steve I was wondering if you went ahead with Formcraft ? We are in Melbourne and thinking of using them. we had the salesman out and he showed plenty of W.A. homes they had built but they are just getting established here. Would love to know if you found them good. Suze Really tight at the top of the stairs- how to get furniture into those rooms? Study books - does anyone really use them these days? Large storage closet would be more functional. 2 6902 If there have been changes, variations, during construction then the drawings should be revised, the building permit amended and the current, as built drawings given to… 2 4499 Ask the council if there is a chance of getting build over easement exemption. Sometimes easements are unused and 24cm is not all that much. Good luck. And yes any builder… 2 13820 |