Browse Forums Building A New House 1 Jun 22, 2010 12:00 am Hi, We are considering using the Polytech Createc High Gloss doors for our kitchen. Just wanting to hear from people who have used this product and what are your thoughts? It is much cheaper than the 2 pac gloss so just wanting to hear if it is still good quality? Also are fingerprints an issue....i received some samples and the fingerprints seem to show up alot, what has your experience been? Any photos anyone has would be greatly appreciated too as I have only seen samples not a kitchen done in this product as yet. Thanks in advance for your help!! Re: Polytec Createc High Gloss doors??? 2Jun 28, 2010 9:11 pm We have also chosen this brand and am a little concerned about the prints but I think you would get thAt with any gloss product. I chose Matt for the laundry but two different and quite dark colours in the kitchen so I'm looking forward to reading some more comments on this product too. Building at Sierra Estate. Interested in getting either the Polytec Boston Oak or Palace Peak for kitchen cabinets. Looking at the Boston Oak ones, it appears that the colour varies significantly… 0 9199 Hi, planning on using the attached stone pieces in my bathroom. I want to remove stains and gloss seal. Can I get some advice on best way to remove stains and best… 0 6717 This link might answer your question. I had the same issue and it turned out to be the roller. https://www.sherwin-williams.com/painti ... %20coating. 4 18171 |