Browse Forums Building A New House 1 Apr 18, 2010 12:11 pm For exhaust fans, simply use a torch and shine light past the grill from inside the house, you should be able to see in between the fan blades (assuming its an axial fan) if you can see duct - it's been flumed. I recently did this in my house which is near key handover and I could see tile, which means, it wasnt ducted/flumed. Sure enough the duct was in the roof but connected to nothing - just sitting there next to the fan. I'm not too sure about rangehoods, it may be a bit more tricky. You may need to get into the roof. My door tends to rub against the frame during winter and I'm looking to fix it so it closes smoothly. Looking online on Youtube I'm seeing methods to fix the alignment and… 0 693 You have mandatory building inspections and privately engaged building inspections. The difference between the two comes down to inspecting the building so it's safe and… 3 18065 I work with owner, he/she is my man on the ground and I instruct them when to visit the site and take photos and I have other tools in the bag. 4 15275 |