Browse Forums Building A New House Re: DIY Stormwater 3Jan 12, 2010 9:57 am Our Build - Places Fairhaven 23+ - https://forum.homeone.com.au/viewtopic.php?f=31&t=28045 Our Landscaping - Belial's Backyard - https://forum.homeone.com.au/viewtopic.php?f=19&t=45375 Re: DIY Stormwater 9Jan 12, 2010 2:15 pm My stormwater was drawn on my engineering which was submitted to council. I dont think it would be that hard to do it, but mine is dug down about 600mm, found that out when we broke it with the post hole digger. I also dont think it would be that hard to work out sewage from stormwater, i already had the outlet to the street, and i think sewage is 100mm and stormwater is 90mm. But not 100% Plumbers 'can be' plumbers, made all the worse by self certification which the building surveyor invariably accepts as proof of compliance! The good thing is that you know know. 3 4872 Grab a hose, insert it at the top of the inlet/down pipe and turn the water on and see where the water is escaping from. Then you'll know. 3 8480 in the stormwater pit or the drain? Those dont look like theyd fit in the drain. Separately, the pits do get stuff in them during the course of the build. For the most… 1 7941 |