Browse Forums Building A New House Re: Corner block setback in Alamanda? 2Dec 22, 2009 3:14 pm Building Monaco32 with Carlisle Homes in Alamanda Estate 20/08/2010 - HANDOVER 24/8!! Blog - http://ourmonaco32.blogspot.com/ Thread - viewtopic.php?f=31&t=14415 Re: Corner block setback in Alamanda? 7Dec 23, 2009 2:33 pm whattever Hi You will have to check with your council for their ruling on this ours states a 6mtr truncation We have a corner block and what they refer to is a truncation point which is a line continuation of your two side boundaries the boundary at 45 deg is irelivant If you continue your side boundary lines till they intersect this is where your truncation point is and where it is worked out from hope this helps Darryl Hi whattever, thanks for your info. Is the 6mtr truncation related to the 6mtr setback in your estate? But in any case, like you said, it seems I don't need to care about the truncation angle. The 5m setback is applied from the very front boundary, even with the truncation point. Hi All, see above image. The required setback from the rear boundary in my case is 5m, as you can see the shape of the site and location of the boundary is slightly… 0 8463 This was on google. Development controls 2.3.1 Front setback D1 New buildings within residential areas shall adhere to a front building line, which is 5.5-6m to the… 1 3677 Thanks Draftroom that definitely helps a heap. We are still at the very early stage of planning to see what kind of house would fit on our plot. While we are on a… 3 15779 |