Browse Forums Building A New House 1 Aug 07, 2009 1:42 pm Does anyone know what the minimum clearance above and on the side of the door opening for a standard panel door is? Re: Garage doors - Minimum clearance 2Aug 10, 2009 12:02 pm I've contacted a lot of garage door suppliers and 250mm headroom seems to be standard. However, side room varies between 90mm to 150mm (on each side) How much clearance is there above and on the sides of your panel garage door? Re: Garage doors - Minimum clearance 3Jul 31, 2013 12:25 pm Im building with lorimer, which they have advised me with the panel door i only have 80mm on one side. So they have installed 120mm jams which look crap and will cause me problems as it narrows the garage. The stupid thing is its only one one side the so the builder hasnt allowed room for the garage door to go in. And looking at it now it looks like it will fit. What is the clearance for? My garage door is from centurion. Building Standards; Getting It Right! When my house was built (over 7 years ago), the post brackets were done to allow for concrete porch, but they didn’t allow for the planned stone paving. I’m finally… 0 1913 My land is 260m2 (10m x 26m) located in claymore NSW. Under campbelltown council. I know in general the following setbacks would apply ground floor side setback =… 0 6920 Hi, only for walking. It is a narrow 1.5m paved area next to house. 2 5417 |