Browse Forums Building A New House 1 Sep 26, 2022 8:14 pm Hi all, trying to source some owner builder info if anyone has experience, particularly in Victoria. Haven't been able to get a clear answer from the VBA as yet. I co-own a piece of land and looking to build 2 townhouses - 1 for me to live in and 1 for the other owner. This should satisfy the requirement of "building to live", however I'm not sure on "single residential dwelling". Technically we are building 2 but it is between multiple owners so it will in fact be 1 each (single dwelling each). I've received varying advice from people being it's not doable at all; or that we will just need to submit 2 separate VBA applications; or that we will need some sort of preliminary subdivision to make it 2 lots before proceeding. Anyone done something like this before? Hi All, I intend on building a house in bushfire prone land ( NSW) and the local council has put a blanket ban on the RFS single dwelling kit and asked me to engage a… 0 234 Hi all. Anyone know when the $11,000 limit was set in legislation for renovations in QLD? Ive been renovating for 5 years now and this was the limit back then. As we know,… 0 5111 Sorry but you have a crap builder. Probably too late now. For our last build I only spoke to builders who would allow me easy access (at no cost). I used my own sparky… 10 11133 |