Browse Forums Building A New House 1 Jun 22, 2021 10:40 pm Guys I am about to start my first project as owner builder. Everything seems understandable to me. One of the things I am not sure of is how to make sure that the soil bearing capacity on the piers are 200KPa. Please could someone with experience on waffle pod slab advise me. Thanks in advance Re: Lot 4220 2Jun 23, 2021 9:48 am I suggest you have the site works and footings properly inspected by your own engineer Assuming your have a proper geotech site report. Last thing you want is the concreter putting in fewer piles at the wrong depth to save himself a couple hundred on concrete. Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs Would anyone on this forum know of a builder/company in Brisbane with house designs for a shallow block. I have a block 20 x 20 so with front and rear set backs I need a… 0 4746 You must be new to the internet. You're also the only person anyone here has ever heard of washing their garage wall. I hate to break it to you, there are insects and… 6 4860 I am building in claymore NSW and this is shown in the building envelope plan. … 0 10037 |