May 10, 2021 3:55 pm
I am in the process of organising landscaping for our newly built house and have a question regarding weep holes and the drop edge beam.
We have a drop edge beam around most of our house as it had to be raised for the hydraulics works and now I need to make some changes to the surrounding landscape levels.
We have two rows of weep holes:
- one row at the base of the drop edge beam (yellow circle); and
- one row at the finished floor level (red).
Both rows have the black plastic moisture barrier installed.
Only the top row has the green termite barrier (green line in photo).
My question is whether by covering the bottom weep holes with cement we would cause any moisture issues?
The landscaper is also looking into this for us, but I wanted to reach out to see if anyone has had to deal with this type of scenario.
Thanks in advance.
Sign in or Join to reply to this Topic
Ashington HomesRetaining wall & Drop edge beamRetaining wall & Drop edge beam
Pratik Thanks for emailing everything over. To answer your original question I would put the blame on your builder. The fill is so close to the edge of your slab in…
SaveH2O5cm gap not kept underneath weep holes in pathways5cm gap not kept underneath weep holes in pathways
NCC-BCA V2 Class 1 & 10 126.96.36.199 Damp-proof course (b)The location of a damp-proof course or flashing serving as a damp-proof course, must be not less…