Browse Forums Building A New House 1 Mar 30, 2021 9:19 pm Hello everyone, I'm getting closer to the end of the build and I could see something unusual in the brickwork. Its been few months since they gave the brickwork an acid clean. And now, the mortar has become very dirty. I'm not sure what's the reason behind this? Even my site supervisor didn't have any idea why this is happening. If it is relevant, the down pipes were installed only recently. And my house doesn't have eaves (yes, it wasn't very intelligent of me) Can anyone shed light based on your experience? Thanks Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Hi all, I am currently building through Simmonds and stuck deciding on my exterior cement roof titles and brick colours. The front and fascade of the house is a pretty… 0 1463 Hi, I am planning to select San Selmo reclaimed original for the fascade of my build. I have seen many photos on line of the brick varying from a rustic to a neat finish.… 0 3374 Building Standards; Getting It Right! Hi, sorry if this is the wrong place - I’m new to the property/building journey (trying to buy my first home) so not sure where/who to go with these sorts of… 0 14197 |