Nov 18, 2020 7:07 pm
Would like to get some advice. We at the early stages of building our first home (duplex) in the ACT.
We are quite happy with the Rawson Medina duplex design (https://www.rawsonhomes.com.au/home-designs/medina) however with a slight change to make it a double garage.
Now i understand that the sides needs to have 3 metres of clearance, however what if we were to convert each double garage to a carport instead? (i.e. it will look similar to a garage from the front of the house, however the back wall of the garage would not be enclosed).
Is it possible to get around the 3m clearance rule if we did this?
Keen for any advice from those in the know or have done something similar.
Sign in or Join to reply to this Topic
TengiketuiBuilding first new home in CanberraBuilding first new home in Canberra
Hi, We are in early stage of planning to build our new home for the first time. Looking for your recommendations and experiences with below builders in terms of quality…
StructuralBIMGuySite cut - advice neededSite cut - advice needed
Hey smzoc2 Welcome There are no short cuts on site cuts, the question becomes whether that small cut is a (price) gouge to the wallet when you build. In order to avoid…
Megs and MattDecor advice needed....master bedroomDecor advice needed....master bedroom
Hello All We recently finished a build and are settling into the house. At the moment, we're running with a colour palette of black, white and grey with…
pastor399Plumbing PEX question - urgent advice needed pleasePlumbing PEX question - urgent advice needed please
Will it leak? No 99.99999999% of the time these crimps will be fine for the entire service life of the installation...... BUT! Check the manufactures installation for…