In the shop because of their yellow lights it looked brown, so I was a bit worried til we got it in the car I could see it's real colour. Crazy what lighting can do.
Browse Forums Building A New House Re: Building a Noosa 26 with Coral Homes 661Sep 07, 2017 7:40 am Lindsay & Ben (Building a Noosa 26 at Wallis Creek, Gillieston Heights) https://forum.homeone.com.au/viewtopic.php?f=31&t=81467&p=1524570#p1524570 Re: Building a Noosa 26 with Coral Homes 663Sep 21, 2017 8:20 pm Joelleg6 Our build thread - Acacia34 by Orbit Homes viewtopic.php?f=31&t=81316 http://bordoncasaacacia34.blogspot.com.au/ Re: Building a Noosa 26 with Coral Homes 665Sep 26, 2017 9:02 am A.Allen87 Ben+Lindsay fec88 Hi Ben & Lindsay, Are you guys happy that you went with the pot draws, is the top draw very useful? DEFINITELY! Wouldn't build another house without doing the same thing again. We have a 8 seating dinner set in one, and tea towels/cling wrap etc in the other & we probably open/shut them more than any other part of the kitchen. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Was just wondering what are your kitchen handle profiles called ? They are called ‘shark nose’ finger pull profile. They cost $798 for all underbench cupboard doors and drawers. They are only available on polyurethane doors - which were $5,825 for the whole kitchen (they are called “colour tech”, the polyurethane finish that is provided by laminex). Lindsay & Ben (Building a Noosa 26 at Wallis Creek, Gillieston Heights) https://forum.homeone.com.au/viewtopic.php?f=31&t=81467&p=1524570#p1524570 Ask the council if there is a chance of getting build over easement exemption. Sometimes easements are unused and 24cm is not all that much. Good luck. And yes any builder… 2 15046 Hi so sorry for the late reply. I already contacted them and they wouldn't tell me instead they tried to get me to talk to one of their home coordinators and I'm not… 2 6167 I would never build with Fowler homes. I built with them in 2021 and till date maintenance issues are pending. All their existing trades and businesses don't work with… 14 109737 |