Browse Forums Building A New House 1 May 02, 2015 9:48 am Hi All, I am planning to knockdown and rebuild an existing single storey brick veneer home. The current home has a 7m frontage. Neighbours on either side also have a 7m frontage. The document below states in section 3.5.4 on page 19 that "The minimum building line for a dwelling-house or dwelling-house addition to the primary road frontage shall be 6m, with a maximum 1m encroachment of any architectural feature (such as a patio, balcony, porch and the like, but not a garage or carport), providing the aggregate width of such feature is a maximum 30% of the front elevation (i.e. facing the primary road) of the dwelling." http://www.blacktown.nsw.gov.au/files/b ... _Zones.pdf My issue is I would like my new home to be 1m forward, leaving a 6m frontage. Q1. Is this possible? Q2. Do I still need to keep the 7m setback due to my neighbours houses being 7m setback? Q3. Can I apply for the 30% rule to be extended to 50%? Q4. Has anyone had any similar experiences with Blacktown Council? Thank you in advance. if the original house is in good condition most of what you listed could be added in stages without the need for KDR and costs and disruption of having to live elsewhere… 1 14166 multiple occ properties are always billed by trades at a premium, rarely per sqm for the lot. You either have trades you know whoe will do by sqm or youre going to get… 1 2850 It is Genneral stairs, but they won't deal with anyone off the street. They will only work with clients of project home builders. I tried to but some of these exact… 3 8702 |