Browse Forums Building Standards; Getting It Right! 1 Jul 14, 2019 1:12 pm Hi, I’m looking at installing a built in pizza oven in one corner of my deck and not sure if 8 additional supports will be enough. My deck sits 100mm off the ground and is made up of 140x45 h3 treated structural pine as joists, bearers are supported every 1m, 500mm spacing, with jarrah decking boards. Where the pizza oven is planned to go I was going to put in 8 additional concreted posts (posts will be 100x100 treated h4 pine 500mm in concrete) evenly spaced in a 1500x1500 square (two parallel rows of 4). The pizza oven and bench top will weigh approx. 600kg. I just want to know if I can work out the load capacity? And if what I plan is enough? Any help would be great. Cheers Rob I've just built 3 stairs off a landing out the back and been told by the private certifier I need hand rails sorry tried to attach a pic but couldn't mine don't have sides… 5 5710 So I'm just reading up on this ecosystem of lights. I'm planning on putting deck lights along the outside edge of a large deck. Will need about 3 packs (18 lights) plus… 0 23021 Hi, does anyone have any experience with using Trex rain escape or EPDM rubber to waterproof a deck so you have dry space underneath. Popular in the US and realize that… 0 3442 |