Jul 14, 2019 2:12 pm
Hi, I’m looking at installing a built in pizza oven in one corner of my deck and not sure if 8 additional supports will be enough.
My deck sits 100mm off the ground and is made up of 140x45 h3 treated structural pine as joists, bearers are supported every 1m, 500mm spacing, with jarrah decking boards.
Where the pizza oven is planned to go I was going to put in 8 additional concreted posts (posts will be 100x100 treated h4 pine 500mm in concrete) evenly spaced in a 1500x1500 square (two parallel rows of 4).
The pizza oven and bench top will weigh approx. 600kg.
I just want to know if I can work out the load capacity? And if what I plan is enough?
Any help would be great.
Sign in or Join to reply to this Topic
ali84How much did your deck cost? (Deck budget advice needed!)How much did your deck cost? (Deck budget advice needed!)
We just had eko-deck decking professionally installed (composite decking which is part plastic/part wood that is very low maintenance compared to timber decking). Ours…
StructuralBIMGuyDA process for a deckDA process for a deck
Hi Dunstar Welcome to the forum Here in WA Floor ratios exclude, Decks, Balconies, basements,lifts, Roof top terraces,etc, Though overlooking and height restrictions maybe…
GaudiDO you need permission to build a deckDO you need permission to build a deck
Building permit http://www.knox.vic.gov.au/Files/Buildi ... quired.pdf Town Planning permit - this May provide you with the information you need. Asking council is often…