Browse Forums Building Standards; Getting It Right! 1 Apr 04, 2018 6:21 pm Re: Should I be concerned? 2Apr 05, 2018 8:04 am Hi Jennifer18 That is absolute nonsense..get a local engineer to inspect the structurals, check the codes & do the calcs, Lodge a complaint with your Building Commission against the certifier & builder.. LOL they are not alternate Solutions & Fixes OT, Do you have your engineering drawings? There should be a Section & Details on Timber framing Please post back if your require general assistance or further advice and remember this also helps others Also read This Builder & Inspector Says This is Compliant Thanks for the photos Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs House movement is always a potential problem and there is a cause. Yes you should have it inspected by a competent and experienced building consultant 2 7058 i imagine you also have another contract with an architect? and yeah, whatever other's said about special conditions and appendices 16 16026 hey there! π so, itβs kinda common for standard drawer depths to be around 500mm since most cabinets use this size to fit the usual runners… 3 20921 |