Jun 19, 2017 8:50 pm
Just wondering what the standard was for depth gas pipes are laid.
Any difference in requirement of depth from
gas meter to footpath or depth of pipes from gas meter to home.
I'm landscaping at present and based on hand excavation they seem to be on average about 300mm deep. I thought gas was meant to be 600mm,
But maybe that is in the U.K.
Re: Gas pipe depth - plumbing standards2
Jun 20, 2017 2:56 pm
It comes under AS/NZS 5601. For residential it is:
Metallic Pipe 300mm
Non Metallic or composite 450mm
They can also be above ground a minimum of 50mm above ground level.
3 in 1 Supadiverta. 0.75mm filter. No downpipes diverted. Can delete overflow pipe. Cleaner Neater Cheaper
Supa Gutter Pumper. An inexpensive gutter overflow solution.
Sign in or Join to reply to this Topic
GaudiGarage skirting - standards?Garage skirting - standards?
My skirting is raised off the garage floor a little. Had never considered it might be raised for a reason. I have thought about caulking between skirting and slab, as the…
StructuralBIMGuyAustralian Standards - Imported SuppliesAustralian Standards - Imported Supplies
There are australian standards for everything check out and at hundreds a pop, a good designer and engineer should have subscription access to the standards BTW, Imported…