Browse Forums Building Standards; Getting It Right! Re: Inspection Basics 61Feb 17, 2015 5:01 pm Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs Re: Inspection Basics 62Feb 17, 2015 5:17 pm Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog Re: Inspection Basics 65Feb 17, 2015 5:29 pm Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog Re: Inspection Basics 68Feb 18, 2015 7:46 am building-expert I think we should get back on topic about inspections before we are pulled up by a mod. Anyone else has something to say about inspections? Mod is here and I have locked this topic. We have specific terms and conditions regarding respect towards others. Feel free to disagree with a stated opinion but a number of you in this thread have turned things personal. This behaviour is not tolerated here. End of discussion. Completed a knock down and rebuild in northern Melbourne. Handover completed 27/09/2013 and now moved in. i would suggest nothing is unreasonable for PCI. we did all sorts, including checking the hot water, checking all the GPO's had power, testing that the showers were… 9 98679 you need to understand the breakdown of warranties. 90 warranty is considered as minor defects rectification period where as the longer ones are more major/structural… 1 5339 Hi, I have this sewer inspection point sitting in an odd spot in the rear of my yard: https://imgur.com/ghLI98q What I'd like to do is put a firepit in that corner of… 0 6522 |