Browse Forums Building Standards; Getting It Right! Re: Getting a slab wrong - bigtime 3Sep 18, 2014 11:02 pm Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog Re: Getting a slab wrong - bigtime 5Sep 19, 2014 8:11 am Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog Re: Getting a slab wrong - bigtime 6Sep 19, 2014 10:12 am Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs Re: Getting a slab wrong - bigtime 7Sep 19, 2014 10:55 am Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog Re: Getting a slab wrong - bigtime 10Sep 19, 2014 6:29 pm mgilla Oh and don't forget the cowboy independant building inspectors. Yes you are right about that. Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog The Soil classification has little to do with piers. The purpose of the classing of the soil is to identify the clay content and the "average expected range of movement… 2 9863 2 31355 there is only 20% difference in concrete strength between 20 mpa and 25 mpa, so check with your engineer first if it fits his calculation tolerances. There are ways to… 6 18304 |