Browse Forums Building Standards; Getting It Right! Re: Anyone used Masterwall before? 2Feb 19, 2014 11:27 am Peter Clarkson - AusDesign Australia www.ausdesign.com.au This information is intended to provide general information only. It does not purport to be a comprehensive advice. Re: Anyone used Masterwall before? 4Mar 06, 2017 2:21 pm Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs Re: Anyone used Masterwall before? 6Mar 06, 2017 6:33 pm mehram or would you just stick to 'tried and tested' bricks and mortar? Yep.. AS3700 masonry construction..... it's best to eliminate any doubt Builders & Engineers use standard cad details it shouldn't cost anymore to update your engineering. HTH Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs As title suggests, looking at using the interlocking Pentablock stacked stone products to replace failing timber retaining… 0 11167 there is only 20% difference in concrete strength between 20 mpa and 25 mpa, so check with your engineer first if it fits his calculation tolerances. There are ways to… 6 14616 Thanks for info, yes met with Power Utility, Builder's Site Supervisor and Electrician on site and aligned on the mains connection. Seems like the builder and Electrician… 2 10031 |