Hello all,
My plans show the FTTH OTN box as being installed directly below the electricity meter box. My builder has ran the cables from the hub to a location offset from the meter box. They are telling me that this is due to minimum clearances of power wires to the gas meter. I find this hard to accept for a number of reasons:
1 - The electricity meter box would have power wires and they must meet required clearances
2 - The document published by the FTTH providers for installers states the clearance to gas meter is only 300mm and installation is preferred below the meter box. There is well in excess of 300mm clearance if installed below the meter box.
Does any body know of any other specific clearance requirements?
Does any body have photos where the FTTH OTN is installed below the meter box (where there is also a gas meter near by), specifically if it is a Burbank home.
Thanks for your help.
Regards
Shane