Browse Forums Building Standards; Getting It Right! 1 Oct 28, 2013 10:30 am http://boostaoakfordsa.wordpress.com Site works: 26/8/14 Trench: 2/9/14 Slab: 8/9/14 Frame: 18/9/14 Bricks: 24/10/14 2nd fix: 24/11/14 Handover: End Feb 2015 Re: cost to upgrade from 2.7m to 3.0m ceiling 4Oct 28, 2013 6:39 pm My Building Thread: viewtopic.php?f=31&t=62776 Re: cost to upgrade from 2.7m to 3.0m ceiling 7Oct 29, 2013 8:19 am http://boostaoakfordsa.wordpress.com Site works: 26/8/14 Trench: 2/9/14 Slab: 8/9/14 Frame: 18/9/14 Bricks: 24/10/14 2nd fix: 24/11/14 Handover: End Feb 2015 Re: cost to upgrade from 2.7m to 3.0m ceiling 9Nov 04, 2013 2:53 pm Agape We were also told that the cost included changes to the roof angles, to keep the roof height within council regs. I really don't get how this costs more, but it was one of the extra costs that they said needed to be covered. I spoke to another builder (though) timber. The quote was for 3m ceiling and if we went with 2.7m, it will be around $6k savings so I still can't believe the $18k variation. Builder has responded and use 'OHS as the main reason' for the variation. http://boostaoakfordsa.wordpress.com Site works: 26/8/14 Trench: 2/9/14 Slab: 8/9/14 Frame: 18/9/14 Bricks: 24/10/14 2nd fix: 24/11/14 Handover: End Feb 2015 How do you remove one of these ceiling air con vents? And is it possible to disconnect the duct joined to the vent from inside the house, without going into the roof cavity? 0 5944 There is water getting into the ceiling, I expected to find some holes in the corrugated roof but there weren't any so I suspect that the roof drip edge is letting water… 0 2452 It sounds like you have a crack in your garage where the wall meets the ceiling, along the shadow line on the… 0 17200 |