Browse Forums Building Standards; Getting It Right! Re: Help with neighbour building a XL shed 5Jul 23, 2013 9:32 pm Build thread: viewtopic.php?f=31&t=65085 Re: Help with neighbour building a XL shed 8Jul 26, 2013 12:12 pm A wall on a boundary (vic) needs to be fire rated & a max. length of 10m plus 25% of the remaining length of the boundary. There are a few other proviso's including shadowing of neighbours north facing windows etc. Peter Clarkson - AusDesign Australia www.ausdesign.com.au This information is intended to provide general information only. It does not purport to be a comprehensive advice. Is it possible to render an old corrugated iron shed.I have heard that it can be done if it is covered with chicken wire first.Not sure of the ratio of the render mix and… 0 4890 Thanks. Yeh ideally that would have been good, but have progressed too far now. Hoping some well placed internal walls fixed up into the battens will provide some… 2 5393 Hi, I am sheeting the inside of a 5.7 x 8m shed with gyprock. Unfortunately the shed wasn't designed for internal cladding but I have been framing it up as strongly as… 0 3399 |