Browse Forums Building Standards; Getting It Right! 1 Jan 30, 2011 8:46 pm We are nearing PCI and was lucky to find someone working on our house over the weekend. We were very disapointed with the quality of the painting. I have tried searching but are having difficulty coming up with anything that might provide a guide as to what is acceptable quality. Can anyone point me in the right direction Re: Painting Standards 2Feb 02, 2011 4:08 pm Have a look at the Victorian Building Commissions Guide to Standards and Tolerances: http://www.buildingcommission.com.au/re ... IDE_07.pdf It also refers to the Australian Standard 2311 which should give more guidance. View our blog at: http://room4acubby.blogspot.com/ Building Standards; Getting It Right! Don't think they are designed for double brick. WA has a particular way of building and unfortunately that's the way a large amount of sills are finished. 3 7004 I believe this is correct. From the picture you can see the power was put in last so the electrician knew where the water was. Really it's a common sense issue more… 4 5152 2 8644 |