Browse Forums Building Standards; Getting It Right! 1 Apr 05, 2024 9:59 pm Hi everyone, My lot has just been titled and during the settlement we found that the rear pegs were not visible. We requested for a re-establishment and pegging plan for my lot and it turned out that the rear fence was built 5cm into my lot. I have requested for the fence to be rebuilt as close as possible to the boundary line. (on-the peg). The Neighbour has insisted that my side was the "clean" side and it's normal to be that way. I am in no way understood what's normal / tolerance. is it really within a tolerance to build the fence that way ? (5cm into my land) OR i have a good ground to ask the neighbour to rebuild it correctly? Hi, It’s important to keep in mind that dividing fences have thickness, so it’s impracticable to expect them to be wholly constructed within the neighbouring… 2 18666 Can anyone recommend a good/affordable retaining wall and fence builder that I can get a quote from located in Sydney? 8 47393 Would anyone on this forum know of a builder/company in Brisbane with house designs for a shallow block. I have a block 20 x 20 so with front and rear set backs I need a… 0 4892 |