Hi,
Noticed my new slab wasnt straight and had crumbling edges. 3 weeks later it crumbles at the edges as you touch it.
I raised my concerns with builder, they advised slab past inspection. Hire my own private inspector who won't inspect post slab pour till frame stage is complete.
Raised concerns again to inspector and surveyor regarding crumbling edges, frame overhang of 4cm in-between zero lot boundaries wall. Once next door goes up there will be no room to fix the overhang.
Site supervisor advised that issues would be inspected at frame mark up. Drive by tonight and frame is up with all issues still there plus now even more damage to the slab.
Ringing the site supervisor again tomorrow.
Can this be fixed? I didnt think slabs would crumble away so much.
Please see attached photos.
First time builder and so stressed.
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅