Sep 27, 2020 3:14 pm
I am planning a 10m2 ensuite extension to a brick veneer house with existing timber framed floor. However the area of extension has been built up level with the existing floor. I am proposing a slab, but I am aware it must be 150mm aove ground level, which will not work. Can I:
A: Build in a drainage channel around the perimeter to achieve the 150mm.
B: Excavate the surrounding area to below 150mm (with drainage) and if so, how far back will this need to extend.
C: Build a brick veneer wall with bottom courses waterproofed
D: Build a say 3 courses of brick, waterproofed inside and out, with a timber framed wall above (due to space consideration a single wall is preferred, if possible).
Sign in or Join to reply to this Topic
MuddyWatersGround level deck and drainageGround level deck and drainage
We have a front (north facing) deck that was built by previous owner who considered himself a 'handy man'. Anyway he hasn't implemented any drainage, the bearers weren't…
faykisCost of house extension (ground floor only) in greater sydneCost of house extension (ground floor only) in greater sydne
Hi guys we have a 3 year old double storey house in sydney. We now want to 1. Either convert the alfresco (has main slap and main roof) into a room, or add an alfresco and…
oklouiseSingle level extension layout advice for South-facing plotSingle level extension layout advice for South-facing plot
looks ok but family room looks cramped without alternate lounge...could you share the floorplan of the existing house with dimensions, what is the width and depth of the…
tranlan257How much does it cost to build the concrete slab-on-ground?How much does it cost to build the concrete slab-on-ground?
Thanks for your reply. To become an owner-builder in Victoria, you need to pass the tests: theory and White Card training. You…
newbuild123Pool level Vs. Slab of new buildPool level Vs. Slab of new build
I wish someone had told me that from the beginning! ha Yeah i think we'll go for alfresco at slab height - the pool gate as shown on the plan though wouldnt work unless…