Browse Forums Windows & Doors 1 Aug 01, 2020 6:31 pm Good evening, I’m planning over the next week or so to paint a number of timber windows at my property. The windows are 1980s timber awning windows which are a colorbond paperbark Colour. My plan is to paint them monument to blend in with the rest of the house. As far as paint goes, what kind of paint should I be looking to buy in terms of Matt, low sheen, semi-gloss or gloss? It’s hard to tell on my current windows as the paint is in poor condition. Does anyone recommend a certain paint to withstand the exterior climate? Am I fine to go to Bunnings and buy dulux or taubmans or should I look at spending a bit more and go with say Haymes paint for example? My plan is to sand them back as much as possible and apply two coats. Happy to take any advice people wish to throw my way. Re: Paint external timber windows. 2Aug 06, 2020 11:13 am Matt would be the best match to Colorbond. Any good paint is suitable. "ECOECO" At 'EcoEco', we design windows, we design the best windows, we do it for you, so that when you’re happy we are happy. Tel. 1800 326 326 Thanks Pulse, thats really helpful and very much appreciated. Also thanks for the pointer on sheathing, thats me watching too many american youtube videos! 6 2809 Engineering timber is certainly a less fuss option, times cheaper to supply and install and better withstands humidity. 1 15921 Before you rip it up, if you can in the grout lines, drill some holes and pour/inject techgrip by sika. I have used it to bond mdf to timber, but in the process it dripped… 1 4294 |