Browse Forums Windows & Doors Re: Window with stone kitchen bench used as the sil 4May 15, 2020 3:34 pm AJW Thanks for that, most interesting. One extra question if I may when you do a window where the frame sits on the stone where do you attached the sill flashing? In my case one of the reasons I was surprised the timber reveal had been removed is during the build the window initially had the reveal. So either they have swapped the window out when they did the kitchen or that’s when they removed the reveal. And my question about the flashing is because I can see through a hole in the back of the dishwasher where the stone and the cladding meets and there is no sign of a flashing. That would be up to the builder, so without seeing the actual detail I can't say. But it would need to have flashing. "ECOECO" At 'EcoEco', we design windows, we design the best windows, we do it for you, so that when you’re happy we are happy. Tel. 1800 326 326 Hi - thanks for your reply. Yes I think 'Ill go for whitish with very speckly bits rather than pure white something like this. PS was actually 2008 I built the… 2 11707 that will depend on the kitchen bench depth. you'll have to specify it so it allows for both the tap and the sink 1 7398 Dear Members I have to decide the Facade column size. My custom builder standard is 350mm with rendering, but i asked for 470mm plus stone or tiles and yet to get… 0 7497 |