Browse Forums Windows & Doors 1 Aug 15, 2008 12:36 pm Don't even know where to start. Building an extension for a veterinary clinic, the architect has drawn a 900 swinging door into the surgery room, and a 900 H&L door to the xray room, Search everywhere for a commercial door company who manufactures hospital like swinging doors,
Anyone got any ideas. anything would be helpful cheers Doug Re: Veterinary clinic internal Swinging Door 2Aug 15, 2008 12:54 pm http://www.ferret.com.au/c/Coldshield/Flexible-PVC-Doors-from-Coldshield-n781442
How about see-through swinging doors? Located in QLD. Where are you ? Maybe they can put you on to a supplier in your state ? Built the Eden Brae Cambridge 34 Family with Boston Corner Facade Re: Veterinary clinic internal Swinging Door 4Sep 15, 2008 11:11 am Dougmega, You may be looking for just the hinge that gives you the swing on the door. Its called a Parliament HInge and you can then custom the door as you need but attach this hinge. Check the site I have attached and see if you have any luck. Even ring the suppliers they will be able to point you in the right direction.
http://www.ilcaustralia.org/search4.asp ... 12&page=30 Re: Veterinary clinic internal Swinging Door 5Oct 01, 2008 10:12 pm Try asking someone at the AVA, or put a post up on their website.
Our sx door swings both ways, & has a glass panel in the top, so they are definitely available. 920 was enough to get the furniture in. We live in a pretty safe area and it’s great to see people walking to the front door. We’re not too fussed about people… 4 1266 Thanks. Yeh ideally that would have been good, but have progressed too far now. Hoping some well placed internal walls fixed up into the battens will provide some… 2 5416 Thank you alexp79 and gommeqld for your advice, that's very helpful, thanks 3 7945 |