Browse Forums Windows & Doors 1 Feb 13, 2017 8:50 pm Hi all, i bought a house that is nearing completion and its is exactly what i wanted to have built myself except for one thing! The main entry door isnt as large as i wanted. The house has a wide hallway and also has taller ceilings, the door the builder used didnt use the space as much as i would have liked. My question is if my doorway is wide and tall and the builder used a narrow door with a glass panel next to it, will it be possible to remove and install a wider door or possibly a nice sturdy pivot door? Re: Pivot door after handover? 2Feb 14, 2017 8:39 am The opening will most likely have a lintel over it supporting roof loads. If you keep the same overall width as the existing frame (or smaller) then there shouldn't be any issue. Peter Clarkson - AusDesign Australia www.ausdesign.com.au This information is intended to provide general information only. It does not purport to be a comprehensive advice. Can you give advice on how to get missing certificates needed for a form 21? Our bank requires us to provide one but we are missing 4 building certificates from our first… 3 71737 yes it does, you've just not understood it. theres a difference. 4 5207 |