Browse Forums Windows & Doors Re: New Home Windows 2Jul 04, 2008 6:10 pm johnstaci I'm building a new home and am getting a bid for new windows. What kind of questions do I need to ask when getting a bid? I am thinkning of using wood clad, low E, and argon. Thanks, John I would get the Uw value for the window (U is the inverse of insualtion, so smaller numbers are better and the w suffix means it's for the whoel window, not just the glass). With wood clad, low-e and argon you would get very good performance (perhaps <2 W/m2.K), which menas you are only looisng 2 W of heat for every square meter for every degree of temperature differene between inside and outside. Demolition August 2009, Construction Started September 2009, Completed December 2010 Is it just a report written to give to the bank initially and it is based on what and how your payments are made up for, or is it a full service where they go out and… 2 2988 Skjm You might want to watch this video: https://www.youtube.com/watch?v=CKx-bsOr2jg If that link doesn't work go to youtube and search for Zac Homes ACA I am really… 1 3060 What you are looking at is fibrous plaster, true gypsum, it is cast on horizontal beds with fibers included to give strength. I has no Asbestos in it. Houses before 1985… 2 4268 |