Browse Forums Windows & Doors 1 Apr 17, 2015 3:36 pm I am wanting an exit door on the rear wall of the garage (between the home theatre and the external garage wall). The builder has this door on the side wall and is telling me i am unabe to fit a door on the rear wall. I am unsure of requirements re: doors, jams and/or architraves etc. Can you please advise if a door will fit and if so, what size? Thank you in advance Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Re: Please help! Can i fit a door and if so, what size? 2Apr 17, 2015 4:06 pm It maybe that the inside width is not enough for a standard door frame. Re: Please help! Can i fit a door and if so, what size? 3Apr 17, 2015 5:03 pm A 720 door would fit but would require a custom made architrave at the very least. You've only got 135mm to play with on the inside if you use a 720 door which is a closet sized door really. Sent from an elegant mobile device using Tapatalk. The Blog for my new house build is http://customaussie.blogspot.com.au and my forum thread is at viewtopic.php?t=74944 This is the current bathroom with a european laundry. Overall internal dimensions are 3.69 wide and 3.65m deep, including the footprint of the laundry. There is a toilet… 0 784 Thanks for much mate. I see that you do cabinets before flooring. For timber flooring, for most parts it's fine because it's got base plates, and for door jabs you can… 7 2235 Hello everyone Please advice me how can I install mesh security window or we cab say mesh flyscreen inside while the pvc plantation shutters are already installed? Is… 0 7837 |