Browse Forums Windows & Doors 1 Mar 23, 2013 1:40 pm Hi all, Wondering if it was possible to change the colour of our frames on our windows and sliding doors? I remember when we built there was a few scratches on the doors and a guy came out and sprayed them to cover the scratches, it is possible to do the whole doors in a different colour and if so, does anyone know of the costs involved in such a process? They are still in as new condition so its purely a cosmetic change. Cheers, ICK ICK So glad the building is over, never again. Loooove our house, but still not quite sure it was worth all of the stress they put us through! Re: Changing the colour of powdercoated frames 2Apr 05, 2013 6:15 pm ICK Hi all, Wondering if it was possible to change the colour of our frames on our windows and sliding doors? I remember when we built there was a few scratches on the doors and a guy came out and sprayed them to cover the scratches, it is possible to do the whole doors in a different colour and if so, does anyone know of the costs involved in such a process? They are still in as new condition so its purely a cosmetic change. Cheers, ICK You will find they will have been powdercoated to start with, which requires a 'factory' to bake. Touching them up with a bit of spray to cover scratches is one thing, but re-spraying the lot and getting a good, long lasting and durable finish I reckon you would be pushing it. Not going to say impossible, just not a good idea. Re: Changing the colour of powdercoated frames 3Apr 05, 2013 10:49 pm ICK Hi all, Wondering if it was possible to change the colour of our frames on our windows and sliding doors? I remember when we built there was a few scratches on the doors and a guy came out and sprayed them to cover the scratches, it is possible to do the whole doors in a different colour and if so, does anyone know of the costs involved in such a process? They are still in as new condition so its purely a cosmetic change. Cheers, ICK The Touch UP Guys will do it and guarantee their work. It won't be cheap, there is a lot of work involved. Ed "ECOECO" At 'EcoEco', we design windows, we design the best windows, we do it for you, so that when you’re happy we are happy. Tel. 1800 326 326 That sucks! Hope it all works out. Good to move away from steel anyway for all your reasons, but it's also thermally poor. 16 17724 If this is a custom build then I would expect the builder to set out the door frame closer to the wall to avoid the gap between architrave and the wall and or specify… 9 8251 |