Windows & Doors
Dec 12, 2007 1:54 pm
Interesting insight into the double glazed industry in the UK.
While I'm not a fan of plastic windows, this article has some interesting points and insights.
Sign in or Join to reply to this Topic
ECOECONow It's 0.3mm Gap For Double Glazing. It beats all the restNow It's 0.3mm Gap For Double Glazing. It beats all the rest
In Australia, acoustic performance is most often not stated. We have acoustically (physically) tested our windows with DGUs and the results have been quite…
EmptyFridgePeeling plastic laminate - advice on removal?Peeling plastic laminate - advice on removal?
At a bit of a loss on this one - we're thinking the original owners never removed the protective laminate covers from their kitchen cabinets after installation and in the…
stonesthrowLightbridge “low E” glazing as an upgradeLightbridge “low E” glazing as an upgrade
What are the u-values of your double glazed windows? There can be very poor double glazed windows. You should be aiming for a u value at least under 3 (ideally around…
alexp79Wall scanner recommendations Western Australia (double brickWall scanner recommendations Western Australia (double brick
You could use thermal imaging camera to detect water pipes. You should be able to get a low end version of it for around $250 from AliExpress.
alexp79Double Brick Insulation - Builder Vs InspectorDouble Brick Insulation - Builder Vs Inspector
Yes, you have a thermal bridge there which needs to be insulated in one way or another. I would simply glue some R2.5 batts there, you should be able to fit them.