Browse Forums Windows & Doors Re: Show me your FRONT DOOR... 5Nov 05, 2010 7:44 pm my new build thread- Ben Trager https://forum.homeone.com.au/viewtopic.php?f=31&t=89826 my switch build thread (2011) https://forum.homeone.com.au/viewtopic.php?f=31&t=36569 Re: Show me your FRONT DOOR... 8Nov 05, 2010 9:07 pm http://take2-customdesigndownslope.blogspot.com 07-10-09 omg they have cut the block 14-05-10 we finally have the keys Re: Show me your FRONT DOOR... 12Nov 06, 2010 9:48 am I actually wanted just a solid wood door with no glass, the one which looks like it has slats across it, but the front hallway is quite big and would have been so so dark, so we went for the glass. I was going to have opaque glass, but wanted to see how we'd go with normal glass and then if we need to later, put a film on it. I think we will be fine as our house is quite high from the road and the portico is really deep. You can''t see in unless your up against the glass with your hands on it looking in. (as you can see in the pic, I'm standing right in front of it, and all you can see is refelection) The only time will be at night if all the lights are on, but shouldn't be too much of a drama because of how our house is positioned. Building Standards; Getting It Right! AS2047 Section 6 Page 31 speaks to Construction/Tolerances of Windows and external glazed doors in buildings Check also New South Wales Guide to Standards and Tolerances,… 12 24802 Get some long brass machine screws and bolt right through the gate and put brass acorn nuts and washers on the other side. It will never come off 1 9074 that will depend on the kitchen bench depth. you'll have to specify it so it allows for both the tap and the sink 1 7394 |