Browse Forums Windows & Doors 1 Jul 13, 2010 10:33 pm We've been looking at ready to hang blinds as a more cost effective option for dressing the windows throughout our home. The window dimensions specified on our plans seem to be right to accommodate for the standard sizes available. The majority of them are specified as 1810mm wide. Unfortunately when I measured some of the actual windows, I found that the physical dimensions are slightly smaller. A couple of the 1810mm windows are actually 1790mm. The question I have is - are most ready to hang blinds made to be exactly as specified, or when they say "1800mm wide" are the blinds made slightly smaller to accommodate for such variations? New beginnings. Use a product like Equisol's Vitalise to clean the deck then coat with a penetrating timber oil. It will look 10 years younger and add value to your home. Visit for… 1 11226 You can put a roller blind behind the shutters. It will be much less noticeable when not in use. 3 17980 About a year ago, I embarked on a DIY project to construct an outdoor Pergola, which measures approximately 5.2 meters by 4.0… 0 24775 |