Browse Forums Windows & Doors 1 Feb 16, 2010 7:52 pm Hi, Looking to replace some internal doors over time. The first one on the list is the toilet, but unfortunately it is a very odd size. 2040mm x 680mm. We are looking for doors with 4 rectangular route marks in them, and would like all of them to match. All I can find are 620mm and 720mm. I think 40mm is too much width to trim out of a door. Any ideas where I can start to look? Thanks in advance. Adrian Re: Finding odd size door 2Feb 18, 2010 3:37 pm Standard Sizes are 620, 720, 820 and so on. Some manufacturers such as Corinthian have 670mm wide doors. Their "Urban" or "Panelcarve" range would probably suit. If you lewt me know where you are, i can give you where to buy... "I never learned a thing until I finished school" - Unknown "You can get anything accomplished, If you don't mind who gets the credit" - Ned Hay Hi Kateo, Are you able to spare any of the tiles? Thanks Tony 10 11391 in the stormwater pit or the drain? Those dont look like theyd fit in the drain. Separately, the pits do get stuff in them during the course of the build. For the most… 1 7913 Current door width is approx 2700, looking to have double doors fitted 820-820. What size does the frame need to be before door jamb? Thanks 0 3523 |