Browse Forums Windows & Doors 1 Sep 15, 2009 2:16 pm Hi All, I have verticals throughout my house which of course blow in the wind and snap. I have a mixture of verticals. Those that contain a plastic insert at the top which are easily replaced with a new insert from Bunnings. The others have the top of the blind molded so they fit into the track and are therefore difficult to fix once broken. I saw a device called a vane saver on youtube of all places, where a clip slides onto the broken vane enabling it to be placed back on the track. I can only find them available on ebay purchased from the USA. Has anyone seen these available in Australia. I am keen to obtain quite a few of them. Cheers Gearel. http://www.fixmyblinds.com/cgi-bin/ez-catalog/cat_display.cgi?93X339232 Electrical just got back to me and said the most they can provide is a single power point on the Bedroom 1 side of that wall. After handover, your towel rail installer… 2 3847 Our Bondi Greenwall was impressive from day one with advanced lush plants to provide a wow factor to this recently renovated living area. The boundary was less than 1… 0 15303 |