Browse Forums Windows & Doors 1 Aug 22, 2009 9:41 pm Whilst down at our home this morning when I was walking around I was thinking what may be used to fill in between the sliding doors externally. Is this section likely to be a hardboard similar to a soffit as obviously they are not going to place brick work in there now? Anyone have pics of what was done on their home? Thanks Ozz Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Built 36sq Plantation "Retreat" on 4460m2 at Spring Mountain, Qld In Living and landscaping.. >>> ... http://retreatspring.blogspot.com Re: Gap between sliding doors? 2Aug 23, 2009 10:01 am ozzroo Whilst down at our home this morning when I was walking around I was thinking what may be used to fill in between the sliding doors externally. Is this section likely to be a hardboard similar to a soffit as obviously they are not going to place brick work in there now? Anyone have pics of what was done on their home? Thanks Ozz Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ I would use an aluminium infill the same colour as the doors... I would ask, why are the handles different heights? Ed "ECOECO" At 'EcoEco', we design windows, we design the best windows, we do it for you, so that when you’re happy we are happy. Tel. 1800 326 326 Re: Gap between sliding doors? 3Aug 23, 2009 12:12 pm Ed, Was thinking the same when I posetd the pics last night. First thought it may be the angle of my pic but then it really seems one handle is lower than the other. Geez, should of checked when I was there for 3 hours this morning. Will have a look later. Probably too late for them to fix unless replacing door. Thanks again ed. Ozz Built 36sq Plantation "Retreat" on 4460m2 at Spring Mountain, Qld In Living and landscaping.. >>> ... http://retreatspring.blogspot.com 2 7526 we have a standard size and often we have a lot of variety to choose 0 3575 We are looking for sliding doors which are 5 metres tall. There are a few European options. Any manufacturers in Australia or distributors? 0 5039 |