Browse Forums Windows & Doors Re: Ensuite Windows 2Jul 14, 2009 11:14 am A balanced diet is chocolate in both hands. Melbourne West Our build viewtopic.php?f=31&t=34169 Landscaping viewtopic.php?f=19&t=51147 Re: Ensuite Windows 3Jul 14, 2009 11:22 am Building at The Ponds Land reg 3/12/09, Land settled 18/12/09 Approved by Design Panel 16/11/09, Submitted to council 24/11/09, Approved by Council 21/1/10 Site Start 21/5/10 http://andyminpondsbuild.blogspot.com/ https://forum.homeone.com.au/viewtopic.php?f=31&t=19800 Re: Ensuite Windows 7Jul 14, 2009 8:16 pm room4acubby Andy_min what are the dimensions of your double shower and the glass. I want to make sure that we don't end up with water just spraying everywhere and I am struggling to find any references about this. Also if you don't mind me asking do you know how much yours will cost, or is it just part of the package? I thought it was best not to take the clothes off the man, there may have been children reading this forum.... Our Double shower is the whole width of the room 2.5 metres. Will probably have 2 X 900mm panels either end with the gap in the middle of 700mm. We have 2 concerns how much water will escape and if it will be cold in winter because the steam wont be trapped in. Have no idea if it will work but if it doesnt we will just have a door added. I have seen costs of around $500 to $800 per panel. We have our own builder so everything is optional for us. Our plans and elevations are in another thread if you wanted a look. We will probably just do a cheaper framed or semi framed in the other bathroom but the ensuite is my baby. We were thinking of having the window above the shower like yours but I had the moisture concern and we had the other wall available, so easier just to move it. I love the man in the shower, I think he needs a name and he can pop up in all your photos. I wonder if he can cook? Building at The Ponds Land reg 3/12/09, Land settled 18/12/09 Approved by Design Panel 16/11/09, Submitted to council 24/11/09, Approved by Council 21/1/10 Site Start 21/5/10 http://andyminpondsbuild.blogspot.com/ https://forum.homeone.com.au/viewtopic.php?f=31&t=19800 Thanks for the suggestion. The space between shower and sinks was too tight. I agree about the toilet location. So I have tried two other options: The lower one is… 3 6144 the step up is 30mm and wanting it to be flat . how much does the concrete have to be lowered .we plan on removing bath and lenghten shower and adding seat. the old bath… 0 11839 |