Browse Forums Windows & Doors Re: PVC or timber windows 5May 11, 2009 7:43 pm * Are we there yet ? Demolition has come and gone ! yippeeee..hang on that was months ago !! come on Mr Builder, dig a hole at least Finaly ! Hole Dug ! well done darren 20/06/2010. Slab is down ! Framing is complete 20/10/2010 we are progressing like a snail on heat - excited and determined but very very slow Steveo Re: PVC or timber windows 13Jun 16, 2009 11:37 am Credit where it's due. I personally have never heard a bad story about Stegbar, their product or their service. Even as industry rivals, we rate them pretty well. Good on them. Also I took a gander at the Miglas Aliclad air infiltration WERS data and it is indeed very impressive. The U-Value is not as ridiculously low as uPVC but not out of the ball park. Isnt it great to have such a choice of good window suppliers accross every ones taste and preference, be it aluminium, uPVC or timber. Paarhammer has to be my pick for timber. Best regards, Brad ------- yep sounds good make the footing bigger to to allow for the pipe in the middle 3 7314 Plumbers 'can be' plumbers, made all the worse by self certification which the building surveyor invariably accepts as proof of compliance! The good thing is that you know know. 3 4857 DIY, Home Maintenance & Repair 3 pipes are coming from upstairs bathroom. 40mm from bathroom sink, 50mm from shower and another 50mm from the bathtub. Highly unlikely that any of these will be open at… 2 843 |