Browse Forums Windows & Doors Re: Stacker door thresholds 3Oct 11, 2023 2:24 pm Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog Re: Stacker door thresholds 7Oct 11, 2023 6:49 pm Sure looks like the type of track that I fitted to my house. My supplier said that the underside has a tray which drains to the front. They cut vertical slots in it. So as long as the lip sits over the cladding it does not need flashing. In my case, I rebated my joists, then I used a double stud wall, and then screwed some 30 x 90 losp to the bottom plate. Perhaps you could remove the bricks and push them towards the concrete and/or cut them so that lip goes over the face of the brick. What's happening above the door? What do you need them to withstand? If it's normal wear and tear, then either will do, if you want resistance to ingress then laminated would be the favourite, but only… 1 12477 920 was enough to get the furniture in. We live in a pretty safe area and it’s great to see people walking to the front door. We’re not too fussed about people… 4 1886 Black on light wood does look good. Not sure if it will be as long lasting as a steel finish? 6 6465 |