Browse Forums Windows & Doors 1 Oct 30, 2008 9:20 pm Can someone please advise me of the best way to fit (nail) timber nosing and scotia moulding to the sills of existing timber windows. I don't want to split or move the nosing while nailing and I need it firm, flush and square to the window. securing it well 3Oct 30, 2008 9:52 pm Thanks. I could pre-drill before nailing, but I'm not sure if liquid nails alone will do the job. Do you nail it diagonally up, down or horizontally straight through the front face of the nosing. The scotia mould will support it underneath. I want to get it right. Flashings over doorways and windows our carpenter has installed flashings that is buckled and short of the window frames and door frames is this right Is there a… 0 13154 Personally, considering your layout (study/work desks in bedrooms), I don't think you have any other option but to leave NW windows and make them as big as possible e.g.… 7 10727 Hi, I'm planning to build a new house and wanted to get some feedback on the different window designs for a master bedroom. Our bedroom is north facing and the bed will… 0 4679 |