Browse Forums Windows & Doors Re: Gaps in Aluminium Window/Door frames 8Jul 28, 2021 11:57 am CorrectCaulking Hi, I would recommend to have the rubber seals removed and caulked with a UV stable silicone, as the rubbers shrinking and pulling away at the corners will be caused by exposure to the sun. We do plenty of this and were just actually doing one today, feel free to head over to our website at https://www.correctcaulking.com.au/Caulking-Melbourne/ and send us an email if you would like some more advice. Thanks, Jono-Correct Caulking The biggest reason for the seals pulling away from the corners is the fabricator stretching the seal during assembly. Ed "ECOECO" At 'EcoEco', we design windows, we design the best windows, we do it for you, so that when you’re happy we are happy. Tel. 1800 326 326 For your reference Performance Labels: Window assemblies in housing, except timber windows, must be labelled so the label can be seen when it is in situ. For timber… 6 2407 Sorry I missed this, simply put this is a pathetic job, and as it stands it is non-compliant... I think the worst part is not in the quality of the workmanship so much… 5 5278 |