Paving & Concreting
Sep 17, 2017 9:29 am
I am building a large structural steel shed on M class soil with a fair bit of clay. Due to the slope of the ground I have had to cut from some areas and fill in others. (I know this is not advisable but due to cost factors was the only option). This has been compacted to some degree and the filled areas have also been sitting for 18 months or so.
My questions are as follows.
Sand Depth : What depth of sand would be advisable in this type of situation under the slab. I know the shed columns will have much deeper footings for support but I am talking for the main shed floor area which is approx 600m2.
Other preparation : Are there any other preparations that would be advisable (prior to concreting coming in)
Any advise would be appreciated.
Sign in or Join to reply to this Topic
seanpain4Established Home Renovation - Concrete Slab and New Shed!Established Home Renovation - Concrete Slab and New Shed!
Hey seanpain4, Thank you! We are pretty happy with how it turned out. The total cost of the slab was about $2,500 but that was worked into the cost of the shed as we…
MauromarioBuilder asked to upgrade class P to E class slabBuilder asked to upgrade class P to E class slab
Hi. Kirashogun Could you pm me what your slab engineering drawings look like i know we did not get anything it would great to see what they really look like. Thank you Mario.
StructuralBIMGuySlab upgrade costs - M class to E classSlab upgrade costs - M class to E class
Reasonable range? Based on what? Geotech report, bearing capacity, materials Quantities, Builder profit? These are questions you should be asking before you hand over a…