Browse Forums Paving & Concreting Re: Advice to repair cracks in my Pad before applying livos 2Feb 19, 2016 10:10 am Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs Re: Advice to repair cracks in my Pad before applying livos 4Feb 19, 2016 9:04 pm Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs Re: Advice to repair cracks in my Pad before applying livos 6Feb 20, 2016 8:25 am Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs Re: Advice to repair cracks in my Pad before applying livos 7Feb 26, 2016 8:14 am Hi Abbey, Did you ask Livos your questions? They have a sister company called Anro Floors that Grind & seal floors with Livos products, http://www.anrofloorcare.com.au/ they may be happy to tell you what products they use to fill cracks on their own jobs, I have found them extremely helpful with advice whenever I have had questions. Every slab has some cracks, so your problem is a common one. The cracks, even if filled will not look the same as the rest of the floor area. Where we have had cracks in build jobs with polished concrete, our contractors have used tenax (from granite benchtop companies) & /or epoxy with colour or concrete dust. These areas will need re grinding & sealing when patched – however I am not sure how the livos will go over these products. Rammed Earth Enterprises, Specialist Builders of Rammed Earth Walls. http://rammedearthenterprises.com.au/ I'm about to put down some Merbau. Is it necessary to oil underneath the boards before laying? 0 1938 Hi, as per the subject. Does anyone have any recommendations for the best value decking oil (Bunning is close to where I live) for a treated pine deck? Thanks 0 10974 The spacing of the studs looks pretty large especially for a load bearing wall. 3 11122 |